kontera3

Saturday 30 May 2009

XBOX 360 X CLAMP FIX - Step 4 - Installing the Repair Kit

I also make music, check it out:))






A) Apply a drop of thermal paste on
the GPU and CPU
Spread it with your finger and cover the whole
surface of the processor




B) Put the XBOX Motherboard on a side like
shown on the Picture and insert all of the bolts and washers
The Motherboard will keep balance on its own so there is no need
to cellar-tape the bolts to the motherboard at all.Take your time, slow and steady wins the race.


Image and video hosting by TinyPic


Tighten the bolts evenly
Only do this hand tight to start with. Only after
use the screwdriver and do quarter turns on each
of the screws.
Make sure you don’t put too much pressure on the motherboard while tightening the screws, otherwise it will bend and possibly brake solders on the board!!

How much is too much? Use common sense.




Go to Step 5 - Overheating the Console

1 comment:

  1. thanks man. my xbox red-ringed like 2 years ago and never really felt like fixing it till... well today as my PC and PS3 were holding it down. used your guide and it's working like a charm. moving in a month and wasn't too keen on taking some broken junk with me, so thanks.

    ReplyDelete

kontera2